This machine used to cut mushroom, banana etc into slice.The depth of cutting is 6mm.
Structural characteristics and working principle
1. this machine has frame, knife combination, switch frame combination, combination of rollers, rubber roller, the main, driven roll and drive system.
2. this machine is mainly made of stainless steel production, the production of conveyor belt by non-toxic rubber belt.To ensure the long-term work not rust, corrosion, non-toxic and harmless.
3. when the conveyor belt material forward movement during operation, when in contact with the knife set, the material being cut.Cut materials continue to run to the next procedure.
Preventive maintenance
All maintenance and maintenance work should be carried out after the cut off power supply.
1,.the machine running 100 hours, should open the shield filling lubricating oil.
2,.when using, do not make the switch and motor and the power cord damage, be affected with damp be affected with damp, the water in order to avoid leakage occurred, in order to ensure safety, please connect the ground wire in ground symbol of the machine parts.
3,.round blade grinding, grinding by mechanical method, as far as possible in order to avoid the manual grinding, make the blade circumferential defects.